Hydronic System Equipment
Hydronic System Equipment for HVAC Water Systems
Our hydronic system equipment portfolio covers circulation pumps, heat exchanger units, HVAC valves, chilled water piping systems, and water treatment equipment. From individual components to integrated heat exchanger units, the range supports chilled water distribution, hot water circulation, heat exchange, flow regulation, and circulating water treatment.
Hydronic Equipment Range
Five equipment groups cover the main functions of HVAC water systems:
| Equipment | Available Products and Configurations |
|---|---|
| Circulation Pumps | End suction, in-line, split case, vertical multistage, horizontal and vertical configurations |
| Heat Exchanger Units | Plate heat exchangers, shell and tube heat exchangers, integrated heat exchanger units |
| HVAC Valves | Isolation, control, balancing, safety and special-purpose valves |
| Chilled Water Piping Systems | Galvanized steel, seamless steel, welded steel and composite pipes |
| Water Treatment Equipment | Electronic water treatment, strainers, integrated treatment units, side-stream treatment, chemical dosing, water softeners and multimedia filters |
These product groups address different stages of water circulation, heat transfer, flow control, distribution and water quality management.
Specifications and Selection of Hydronic Equipment
Circulation Pumps for HVAC
Available pump configurations include:
- End suction pumps
- In-line pumps
- Split case pumps
- Vertical multistage pumps
- Horizontal and vertical installations
- Single-pump and duplex duty/standby arrangements
Fixed-speed and variable-speed drive options are available.
Pump selection is based on system flow rate, total dynamic head, fluid temperature and viscosity, glycol content where applicable, operating schedule and installation space.
Heat Exchanger HVAC Units
Two main heat exchanger structures are available, together with integrated heat exchanger units.
| Parameter | Plate Heat Exchanger | Shell & Tube Heat Exchanger |
|---|---|---|
| Plate or tube thickness | 0.4–0.8 mm | 2.0–2.5 mm |
| Temperature | Up to 220°C with silicone gaskets | Up to 225°C |
| Pressure | 1.0–1.6 MPa, customizable | 1.0–1.6 MPa, customizable |
| Flow rate | Customizable | Customizable |
| Construction | Corrugated heat transfer plates | Shell, tube bundle and tube sheets |
Plate heat exchanger material options include stainless steel 304, 316 and 316L, titanium and Hastelloy.
Gasket options include NBR, EPDM, FKM, Neoprene and Silicone, with the published gasket temperature range of -65°C to 220°C. Actual material and temperature suitability depend on the selected gasket.
Integrated Heat Exchanger Units
The plate heat exchanger unit integrates:
- Plate heat exchanger
- Circulation pumps and make-up pumps
- Strainers and control valves
- Instrumentation and electrical controls
- Valves and piping
The units are factory-assembled and require 4–5 site connections.
Available control options include on-site automatic control and remote control, with variable-temperature and variable-flow operation.
Shell and tube heat exchanger units integrate the heat exchanger, pumps, instrumentation, electrical controls, valves and piping. They are also available with variable-frequency or constant-pressure make-up control and outdoor-temperature-based variable-temperature control.
HVAC Valves and Flow Control
| Valve Function | Available Types |
|---|---|
| Isolation | Gate, ball, butterfly and diaphragm valves |
| Flow control | Globe, 2-way, 3-way and pressure-independent control valves |
| Hydronic balancing | Manual and dynamic balancing valves |
| Safety and protection | Pressure relief valves, check valves, strainers and air vent valves |
Manual operation is available through handwheels, levers and gear mechanisms. Electric actuators support automated operation through building management systems (BMS). Pneumatic actuation is also listed as an available method.
Connection options include threaded, flanged, welded and grooved connections.
Chilled Water Piping Systems
Available piping materials include:
- Galvanized steel pipe, with threaded connections commonly used for diameters up to DN100
- Seamless steel pipe
- Welded steel pipe (ERW), including black steel and galvanized finishes
- Stainless steel welded pipe
- Composite multilayer pipe using PE-RT or PE-X layers and an aluminum core
Schedule 40 and Schedule 80 are listed as available pressure-rating options.
Connection methods include threaded, flanged, welded and grooved connections.
The published chilled water supply temperature reference is 4°C–13°C. Suitable insulation is required to address condensation and heat gain.
Water Conditioner for HVAC
The water treatment range includes:
- Electronic water treatment units
- Backwash strainers
- Full-range integrated water treatment units
- Multi-phase full-range integrated water treatment units
- Open-loop and closed-loop side-stream water treatment units
- Physicochemical integrated water treatment units
- Fully automatic chemical dosing systems
- Fully automatic water softeners
- Multimedia filters
Typical technical specifications
| Parameter | Published Value |
|---|---|
| Working pressure | 0.6–2.5 MPa |
| Pressure loss | 0.02–0.06 MPa |
| Input voltage | AC 160–240 V |
| Working voltage | Below 36 V |
| Power consumption | 30–600 W |
| Media temperature | Below 95°C |
| Ambient temperature | -25°C to 50°C |
| Relative humidity | Below 95%, non-condensing |
| Filtration efficiency | Greater than 75% |
| Filtration precision | 300–2,000 μm |
Applicable media include surface water, groundwater and circulating water.
Selected models support differential-pressure-based automatic backwashing, automatic blowdown, online water quality monitoring and alarm functions. Fully automatic water softeners use time- or flow-meter-controlled regeneration, while chemical dosing systems automatically regulate chemical injection.
Available Configurations and Integration
- Pumps: Pump structure, horizontal or vertical installation, single or duplex arrangement, fixed-speed or variable-speed drive.
- Heat exchangers: Plate or shell-and-tube construction, heat transfer materials, gasket materials, customizable pressure and flow rate.
- Heat exchanger units: Integrated pumps, valves, strainers, instrumentation and electrical controls, with local or remote control.
- Valves: Valve function, manual or actuated operation, and threaded, flanged, welded or grooved connections.
- Piping: Galvanized, seamless, welded or composite materials, with different connection methods and Schedule options.
- Water treatment: Full-flow or side-stream treatment, filtration, softening, chemical dosing and monitoring configurations.
Actual specifications and configuration combinations depend on the selected product and project operating conditions.
Hydronic Equipment Supply and System Integration
The product range covers individual hydronic components as well as integrated heat exchanger units. Factory-assembled heat exchanger units combine the main heat transfer equipment with pumps, valves, instrumentation and electrical controls, reducing the number of site connections to 4–5 for the plate heat exchanger unit described above.
For wider HVAC projects, the company's published service scope includes solution design, equipment selection, integrated manufacturing, installation, commissioning and ongoing maintenance.
This provides a basis for discussing both individual equipment requirements and coordinated system configurations.
Request a Hydronic Equipment Quotation
Send us your required equipment type, operating conditions and purchase quantity to request a quotation.
For technical evaluation, include available flow rate, head, working pressure, operating temperature, connection method, water quality requirements or existing equipment specifications. Drawings, equipment schedules and reference photographs can also be provided.
Our team can review the available information and discuss suitable hydronic equipment configurations for your project.
As one of the most professional hydronic system equipment manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. If you're going to buy customized hydronic system equipment made in China, welcome to get quotation from our factory. For price consultation, contact us.
Chilled Water Piping Systems, HVAC Valves, Water Conditioner For HVAC








